IP Surveillance Setting 
DVRs Setting 
FAQ 


   
 
DVR Setting l Support
 
Untitled Document
 
1. How to set up Windows
2. How to set up Firewall
3. VGA
4. List of programs to be installed
5. How to update programs
6. How to save existing settings when
updating programs

7. How to set up recording disc
8. How to change user ID and password
9. How to adjust the speed of recording
10. How to set up motion recording
11. How to set up sensor recording
12. How to set up De-interlace

13. How to control PTZ
14. Controllable PTZ

15. How to set up e-mail

16. How to set up Anti-Pirating function for pictures
17. How to check if image data have been pirated
18. How to set up audio
19. How to set up sensor/alarm
20. How to back up data
21. How to connect DVR to Client program
22. How to set up an alarm for DVR in Client
23. How to connect DVR to IE(Internet Elplorer)
24. How to utilize DDNS service
25. How to set up IP(or Router)
 

25. How to set up IP(Router)

If DVR is connected to IP(router), you should set up a port-forwarding function at IP(router). If DVR is directly connected to internet without IP(router), setting-up of port-forwarding function is not needed. On the chart below are ports to be used in DVR and a user can modify them.

*List of port for port-forwarding 

Function Type Port number
Web port TCP 80
Connection port TCP 7074
Audio port TCP 7075
Video port TCP 7076
Media port TCP 7077
Audio1 UDP 49557
Audio2 UDP 49559
Alive port UDP 49560
Refer to Router or IP manual for setting up port-forwarding.

If individual IP is used, ‘Proxy’ should be set up.
DVR program -> environment set up -> network -> web monitoring set-up -> save proxy set-up
DVR program -> environment set up -> network -> Input IP address, and domain name if DDNS is set up.

[wariness]
If DVR is connected to IP(router), you should set up a port-forwarding function at IP(router). Refer to Router or IP manual for setting up port-forwarding.
If the standard ‘web server port’ is not used, change ‘web server port’.